BSE
More Information for BSE MF21286FN
Continue Shopping
 
BSE MF21286FN  
$139.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$139.79
Total
BSE MF21286FNclose
<
>
Part image
Complete Assembly

BSE NEW Mass Airflow Sensor lineup uses CERAMIC PCBs to provide the best product with added enhancements.

Features & Benefits:
  • Resistors are digitally calibrated for optimal precision
  • Superior thermal stability under even the most extreme under-the-hood temperature changes
  • Higher consistency in voltage readings at all rpms
  • More efficient heat dissipation to extend the service life of the component
  • Double binding for improved sensor reliability
Check for Vacuum Leaks First!

Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:

  • Cracked or loose Vacuum Hoses / Connectors - an audio Stethoscope can help detect air induced sounds from vacuum leaks.
  • Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
    • Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
  • Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
  • Cracked Intake Boot (found in the "Engine" category)
Videos

Cleaning Your MAF Sensor

Additional Resources

RockAuto Newsletter: Maintaining the Optimal Air/Fuel Mixture
OEM / Interchange Numbers: 059906461N, 420133471, 95560612350

BSE Warranty Information:
1 Year (Unlimited Miles)