PLATINUM DRIVELINE
More Information for PLATINUM DRIVELINE 06001
{Alternate Inventory Numbers: 06-001}
Continue Shopping
 
PLATINUM DRIVELINE 06001  
$71.99
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$71.99
Total
(Only 1 Remaining)
PLATINUM DRIVELINE 06001close
Part image
PLATINUM DRIVELINE 06001 Specifications
Alignment Tool IncludedYes
Clutch Disc Diameter7.125
Disc MaterialOrganic
Disc Type Sprung SolidSprung
Flywheel IncludedNo
Flywheel Spec+.007
Input Shaft Diameter0.813
Input Spline Quantity18 Teeth
Pilot Bushing IncludedYes
Pressure Plate TypeDiaphragm
Slave Cylinder IncludedNo
Spline18 Teeth
Platinum Driveline offers a full line of driveline parts, including automotive clutch kits, flywheels and hydraulics. Every part is engineered and designed to meet or exceed your vehicle's performance specifications. Platinum Quality ensures that the job is done right the first time, every time!

Clutch Kit Features:
  • Engineered to meet or exceed OE specifications
  • Provides ideal power transfer with precise pedal feel and longer lasting installation
  • Each clutch kit includes pressure plate, clutch disc, release bearing, and any applicable pilot bearing/bushing
  • Pressure plate assemblies are functionally tested for finger height, clamp load, release load, balance, and lift
  • Disc assemblies are functionally tested for compressed and free thickness, spring rate, torsion durability, and lateral run-out
  • Aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability
  • Release bearings, where included, meet or exceed OE fit, form, and function specifications
  • Pilot bearings/bushings consist of either needle roller or oil impregnated bronze designs
  • Assembled in the USA

Organic vs. Kevlar vs. Ceramic Friction Disc - What Is The Difference?

The Friction Disc is a vital part of any clutch. It connects the pressure plate and flywheel, and is responsible for transferring engine power to the rest of the vehicle. Clutch Kits come with several different types of friction discs, and it is important to understand the pros and cons of each material:

Clutch Disc Material Smooth Engagement Holding Power
(Friction "Grab")
High Torque Capacity Lifespan Gentle To Flywheel
Organic
★★★ ★★ ★★★
Kevlar
★★★ ★★ ★★ ★★★ ★★★
Ceramic / Cerametallic
★★★ ★★★


Tips & Tools For The Job
  • Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
  • Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
  • Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
  • Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
  • Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.



Attention California Customers - Warning: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov


Warranty Information:
24 Months / 24,000 Miles