ACDelco Clutch and Brake Fluid, DOT 4, is a premium brake and hydraulic clutch fluid for systems requiring DOT 4 fluid. This fluid is suitable for all applications requiring a DOT 4 performance level and meets GMW 3356. The ACDelco Clutch and Brake Fluid, DOT 4 GMW protects internal components from corrosion under normal use and service.
Brake Fluid Comparison Chart
Fluid Type
Compatible With
Quality
Chemical Composition
Minimum Dry Boiling Point
Minimum Wet Boiling Point
DOT 3
DOT 3 Brake Systems
Good
Glycol Ether
401°F
284°F
DOT 4
DOT 3 & DOT 4 Brake Systems
Better
Glycol Ether, Borate Ester
446°F
311°F
DOT 5.1
DOT 3, DOT 4 & DOT 5.1 Brake Systems
Best
Glycol Ether, Borate Ester
518°F
374°F
DOT 5
DOT 5 Brake Systems ONLY
Specialty
Silicone
500°F
356°F
How do I know if my brake fluid needs to be changed?
Brake fluid absorbs moisture. Water in brake fluid can boil during repeated or extended braking, creating air bubbles which reduce braking effectiveness. Water also can corrode metal brake lines. Change your brake fluid when:
Fluid is dirty or rust-colored (it should be clear or translucent)
Brake pedal feels mushy or requires a lot of pressure (possible air bubbles)
You've reached the miles or years your owner's manual recommends for fluid changes
Not returnable once opened.
Videos
The Different Types of Brake Fluid
Additional Resources
Material Safety Data Sheet (MSDS) Attention California Customers - Warning: These products can expose you to chemicals, including Diisononyl Phthalate, Carbon black extracts, Nickel, 1,3 Butadiene, Ehylene Oxide, Epichlorohydrin, which are known to the State of California to cause cancer, and Bisphenol-A, Ethylene Glycol, Ethylene Oxide, 1,3 Butadiene, Epichlorohydrin, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
OEM / Interchange Numbers: 19299570
Warranty Information:No Warranty; Not Returnable Once OpenedWarranty Details