JOHNSEN'S
More Information for JOHNSEN'S 70126
{Alternate Inventory Numbers: 7012-6}
Continue Shopping
 
JOHNSEN'S 70126  
$8.29
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$8.29
Total
JOHNSEN'S 70126close
Part image
Silicone DOT 5; 12oz.
Johnsen’s Silicone DOT 5 Brake Fluid is essentially non-hygroscopic compared to conventional brake fluids, absorbing less than one percent by weight of water.

Features:
  • Specially formulated hydraulic brake fluid that provides superior benefits
  • Not to be used in ABS systems

Brake Fluid Comparison Chart

Fluid Type Compatible With Quality Chemical Composition Minimum Dry Boiling Point Minimum Wet Boiling Point
DOT 3
DOT 3 Brake Systems Good Glycol Ether 401°F 284°F
DOT 4
DOT 3 & DOT 4 Brake Systems Better Glycol Ether, Borate Ester 446°F 311°F
DOT 5.1
DOT 3, DOT 4 & DOT 5.1 Brake Systems Best Glycol Ether, Borate Ester 518°F 374°F
DOT 5
DOT 5 Brake Systems ONLY Specialty Silicone 500°F 356°F
How do I know if my brake fluid needs to be changed?

Brake fluid absorbs moisture. Water in brake fluid can boil during repeated or extended braking, creating air bubbles which reduce braking effectiveness. Water also can corrode metal brake lines. Change your brake fluid when:
  • A Brake Fluid Tester shows excess moisture
  • Fluid is dirty or rust-colored (it should be clear or translucent)
  • Brake pedal feels mushy or requires a lot of pressure (possible air bubbles)
  • You've reached the miles or years your owner's manual recommends for fluid changes
Not returnable once opened.
Videos

The Different Types of Brake Fluid


Attention California Customers - WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.