ARNOTT
More Information for ARNOTT P3282
{Alternate Inventory Numbers: P-3282}
Continue Shopping
 
ARNOTT P3282  
$493.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$493.79
Total
ARNOTT P3282close
<
>
Part image
ARNOTT P3282 Specifications
Air Spring System TypeOpen
Compressor Amperage20
Compressor Body ColorBlack/Gray
Connector GenderFemale
Connector Quantity1
Dryer IncludedYes
Grade TypeStandard
Maximum Pressure (psi)180
Mounting Bracket IncludedYes
Mounting Hardware IncludedYes
Mounting Hole Quantity3
Protective Cover IncludedNo
Relay IncludedYes
Terminal GenderFemale
Valve Block IncludedNo
Voltage12
Wiring Harness IncludedNo

Arnott's air suspension compressor P-3282 is a direct replacement for the original OE compressor and connects directly into the vehicle's air lines and electrical connector. The Arnott compressor includes a mounting bracket, heavy-duty motor, epoxy-coated finish to prevent corrosion, thermal overload protection, new dryer and an intake air hose and electrical connector. The Arnott aftermarket compressor is a powerful, extremely compact, and lightweight compressor backed by Arnott's industry leading warranty.


Installation Information

Air Compressor failure is typically the result of a leak or other issue in the air suspension system. To ensure that your new compressor will work without issue, you should do the following, prior to installation:

  • Check for blown fuses and ensure the relay is working properly. A failed Air Suspension Compressor Relay is a top cause of air compressor failure. They normally fail in the “closed” position and should be replaced during compressor installation
  • Check and replace the Air Springs if they are showing signs of cracks, deterioration, moisture, or are leaking. Complete Air Strut assemblies, which include the Mount and Air Spring, can be found in the Strut category
  • Verify that the air line and wiring harnesses are connected without signs of physical damage
  • Ensure that the fittings and valve connections are fully seated and undamaged. Make sure that the air line is secured at the proper depth
  • Check the electrical connections and the orientation of the Ride Height Sensor arms
  • Check all Air Suspension Solenoid connections and fittings; inspect for any cracks or other damage
  • Inspect the air lines for kinks, holes or other damage


Looking To Convert Your Air Suspension To a Coil Over Suspension?

If you like the load-leveling capabilities, or if you tow with your vehicle, then you should repair the original air suspension system.

If not, and you are tired of the high cost of replacing air suspension components, conversion components can be found for most vehicles under the Coil Spring, Strut / Coil Spring / Mount Assembly and/or Suspension Conversion Kit categories, in the RockAuto catalog, depending on the vehicle setup.

Additional Resources

Installation Instructions
OEM / Interchange Numbers: 0993200104, 099320010480

ARNOTT Warranty Information:
Parts purchased before 7/1/2023 - Limited Lifetime. Parts purchased on or after 7/1/2023 - 24 Months.
Warranty Details