|
MOOG 358
|
|
$17.56
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$17.56
Total
|
|
|
|
|
|
| MOOG 358 Specifications |
|---|
| Bearing Cap Axis 1 Diameter | 1.375 in | | Bearing Cap Axis 1 Diameter | 35 mm | | Bearing Cap Axis 2 Diameter | 1.375 in | | Bearing Cap Axis 2 Diameter | 35 mm | | Bearing Cap Type | 4 Plain Round Bearings | | Greaseable | Yes | | Length Axis 1 | 4.967 in | | Length Axis 1 | 126.162 MM | | Length Axis 2 | 4.967 in | | Length Axis 2 | 126.162 MM | | Length Measurement A | Outside of Bearing To Outside of Bearing | | Length Measurement B | Outside of Bearing To Outside of Bearing | | Lube Fitting Location | Regular Lube Fitting in Cross | | OE Series | Spicer 1550 (SPL70) | | Part Description | Universal Joint | | U-Joint Identification | 4 Plain Round Bearings |
|
|
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Features & Benefits:- Cross body drilled and tapped with grease fitting to allow joint maintenance
- Patented thrust washer technology absorbs axial loads preventing metal to metal contact
- Exclusive anti-drainback design controls lubrication flow and prevents dry startup
- OE needle bearings ensure size consistency, proper hardness and strength
- Metal shielded nitrile rubber grease seals have compressed double lip design
- Consistent heat treatment achieves good bearing hardness for durable wear and strength
 Which Universal Joint Is Right For You?
|
Drive Conditions |
| Type |
Normal City / Highway |
Dirty / Dusty |
Extreme Weather |
Heavy Towing |
Off-Road / Racing |
Economy
|
 |
|
|
|
|
Standard Replacement
|
|
|
|
|
|
| Heavy Duty |
|
|
|
|
|
 Greasable vs. Non-Greasable While non-greasable universal joints were once considered an upgrade over greasable universal joints, the differences in strength and durability are negligible today. Advancements in technology mean either option is a great choice, but there are some key pros and cons to consider:
| NON-GREASABLE |
- Pros: Non-Greasable U-Joints do not need to be serviced regularly. After installation, these U-Joints require little upkeep and primarily need to be monitored for signs of failure.
- Cons: Since these U-Joints cannot be re-greased, the entire U-Joint must be replaced at the first sign of wear / noise as to not risk failure.
|
| GREASABLE |
- Pros: Greasable U-Joints are serviceable and contaminants can be flushed out easily. Regular maintenance and greasing also means you'll be more in tune with the wear status of the joints.
- Cons: These U-Joints need to be checked and greased regularly. If this sounds unfavorable or if you're forgetful, non-greasable may be a better choice.
|
 Preventative Maintenance Tips The key to maximizing the performance and durability of any universal joint - as well as related parts such as drive shafts - is preventative maintenance. Universal joints are designed to last the life of the vehicle, but can wear down or break if neglected or overloaded. Follow these tips to avoid premature failure of your vehicle's drivetrain:
- If a greasable universal joint is installed, periodically check them to ensure they are properly greased (at the very least, at every oil change).
- Inspect the yokes that hold your universal joints for cracks, stress marks, or worn or damaged seal mating surfaces, and replace them if any of these are present.
- Check your seals for signs of leakage, and replace them if leaks are present.
- Periodically check for drive shaft play, which is an indication that a universal joint or seal has failed and needs to be replaced.
- Inspect drive shafts for cracks, stress marks, dents, or bends, and replace them if any of these are present.
|
| OEM / Interchange Numbers: 15535490, 68036720AA, 84679955, 88935895 |
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).Regular Inventory Warranty Information:Limited Lifetime |
|
