|
TRAKMOTIVE SB8126
|
|
$65.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$65.79
Total
|
|
|
|
|
|
| TRAKMOTIVE SB8126 Specifications |
|---|
| ABS Ring Tooth Count | 0 | | Abs Tone Ring Included | No | | Axle Nut Head Type | Hex | | Axle Nut Height (IN) | .79 | | Axle Nut Height (MM) | 20 | | Axle Nut Hex Size (IN) | 1.25 | | Axle Nut Hex Size (MM) | 31.8 | | Axle Nut Included | Yes | | Axle Nut Length (IN) | 1.45 | | Axle Nut Length (MM) | 36.72 | | Axle Nut Locking Type | Cotter Pin | | Axle Nut Thread Size | M22X1.5 | | Boot Material | CR | | Inboard Joint Type | Male | | Inboard Shaft Connection Style | Spline | | Number of Bolt Holes | 0 | | Number Of Inboard Joint Bolt Holes | 0 | | Number Of Inboard Shaft Bolts | 0 | | Number Of Inboard Splines | 25 | | Number Of Outboard Joint Bolt Holes | 0 | | Number Of Outboard Shaft Bolts | 0 | | Number of Outboard Splines | 27 | | Outboard Joint Type | Conventional | | Outboard Shaft Connection Style | Spline | | Overall Compressed Length (IN) | 32.13 | | Overall Compressed Length (MM) | 816 |
|
|
TrakMotive is a recognized aftermarket leader of CV axles. TrakMotive axles are designed from the ground up to be the highest quality, most reliable and durable CV axles available in the aftermarket.Features & Benefits:
- ABS-Consolidated & Assembled with the correct ABS Tone Ring*
- Heat-Treated & Precision Machined Solid Steel Center Shafts
- Heat-Treated Machine-Ground Cages, Races & Bearings
- Assembled with High-Quality Neoprene Dust Boots & Stainless Steel boot clamps
- Includes necessary attaching hardware and grease*
- Includes new dust rings & guards*
- High Strength Spring Steel Retaining Clips*
*Where required
Installation Tip: If the part comes with an ABS Ring, but your vehicle does not have ABS, you may leave the ring in place if it does not interfere with installation.
 Additional Resources
Installation Tips
Top 5 Noise Symptoms Associated w/ Worn CV Shafts
|
|
