• Specifically engineered to deliver optimal braking performance
• Patented, application-specific shape and customized slot design deliver improved braking performance, reduce rotor wear and minimize dust to increase the life of the brake pad
• Design increases turbulent air flow for improved heat dissipation and cooler operation
• Superior galvanized steel plates with mechanical retention and premium stainless-steel hardware for better corrosion resistance and longer life
• Pad shape and five shim layers deaden noise, vibration and harshness
• Includes premium stainless-steel hardware, where applicable
• Features Wagner OE25™ zero-copper friction formulation

Wagner® E-Coat Brake rotors are engineered for maximum performance with an E-Shield® protective electro-coating applied to all non-braking surfaces. This black-colored coating prevents corrosion, makes removal for service fast and simple, and is visually attractive for open spoke wheels. A turned, smooth surface finish aids in the proper seating of the friction and requires less time for rotor “break-in".

Rotor Features & Benefits:

• A precision cut finish of the outer diameter prevents improper balance issues that can result in a loss of vehicle control
• A smooth finish aids in the proper seating of the friction resulting in less time needed for pad “break-in”
• OE Specific vane design provides effective cooling capabilities resulting in increased stopping power and decreased noise, vibration and harshness
• E-Shield coating is applied to all non-braking surfaces which prevents corrosion and is visually attractive
• Tighter tolerance specifications reduce thickness variation and lateral run-out to ensure a balanced rotor that reduces pedal pulsation and extends pad life
• Wagner utilizes a combination of premium grade iron, a stringent casting process and a controlled manufacturing environment which results in superior braking performance

Installation Tips

• Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
• Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
• Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
• Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
• Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
• After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Quantity Components that come in this kit 2 Rotor WAGNER Info Rear; 5 Stud Wheel; with 298mm Rear Rotor WAGNER 1 Brake Pad WAGNER OEX; Ceramic; Includes Installation Hardware Info Rear WAGNER