More Information for MELLING CK22310BT

Continue Shopping

MELLING CK22310BT

$852.79

Price

$0.00

Core

+ Sold in packs of 1x1

Pack

$852.79

Total

Add to Cart

Point to Zoom

Stage 3 LS; High Performance; Titanium Retainers And Beehive Springs; No Warranty

Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials. Listed below is a group classification for the high performance camshafts (the durations shown are based on .050 cam lift). The descriptions within each group show the characteristics of the cams in that group as well as any recommended modifications to the car or engine that will help get the desired performance.

Heavy Duty / Performance Classifications

	Class / Stage 1	Class / Stage 2	Class / Stage 3	Class / Stage 4
Idle Quality:	Good	Fair	Rough	Rough
Torque / Horsepower:	Low RPM torque and mid-range horsepower	Good low to mid-range torque and horsepower	Good mid to high RPM torque and horsepower	Mid to high RPM torque and horsepower
Stock / Modified Engine:	Will work with stock or slightly modified engine	Will work with stock or modified engine	May need improved carb, exhaust and ignition systems	Need proper selection of rear axle ratio and improvements in carburation and exhaust systems
Transmission:	Manual or Auto transmission	Manual or Auto transmission	Manual or high stall auto transmission	Manual transmission or automatic with a very high stall converter
Vacuum:	Stock	Possibly lower vacuum than stock	Will have lower vacuum than stock	Will not have enough vacuum for power accessories
Power Range:	1200 - 4000 RPM	2000 - 4800 RPM	2200 - 5600 RPM	3200 - 6500 RPM
Duration (based on .050 cam lift):	200� - 215�	215� - 230�	230� - 245�	Over 245�
Best For:	Towing / Plowing / RVs	Street-Legal Hod Rods	Combination Street / Drag Racing	Serious Racing

Quantity

Components that come in this kit

Camshaft

MELLING 22310 Stage 3 LS; High Performance; No Warranty Info

Flag indicates this part fits vehicles sold in the USA. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.

Flag indicates this part fits vehicles sold in Canada. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.

RPM Range: 2200-5400; 3 Bolt NON VVT; 112 Degrees Of Lobe Separation; Intake Duration At .050 Lift: 220; Exhaust Duration At .050 Lift: 224; Non Active Fuel Management Engine; Hydraulic Roller; 0.575 IN Intake Valve Lift; 0.575 IN Exhaust Valve Lift