BOSCH
More Information for BOSCH F00H600075
Continue Shopping
 
BOSCH F00H600075  
$98.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$98.79
Total
Choose
BOSCH F00H600075close
<
>
Part image
BOSCH F00H600075 Specifications
AdjustableNo
Connector GenderFemale
Connector Quantity1
Connector ShapeRectangular
Fuel System TypeElectronic Fuel Injection
Gasket or Seal IncludedNo
Housing MaterialAluminum
Idle Air Control Motor IncludedNo
Inlet TypeBarb
MaterialAluminum
Mounting Hardware IncludedNo
Terminal GenderMale
Terminal Quantity6
Terminal TypeBlade
Throttle Body MaterialAluminum
Throttle Body Spacer IncludedNo
Throttle Body TypeElectrical
Throttle Position Sensor IncludedYes
Voltage12
Throttle Body Assembly
Bosch is a recognized leader in Electronic Throttle Body (ETB) production, with more than 25 years of ETB experience. As the manufacturer of over 100 million throttle bodies – Bosch maintains its commitment to producing all of its ETBs on actual Original Equipment (OE) production lines with best-in-class quality.

The throttle body is an essential part of the inlet air stream of the modern gasoline engine. In combination with the electronic throttle control system, the throttle body assembly is designed to control the amount of fresh air entering the engine. Manufactured in U.S.A. on OE production line.

Features & Benefits:
  • Brushless Direct Current (BLDC) motor ready
  • Analog and Single Edge Nibble Transmission (SENT) capable interface
  • Best-in-class Hall IMC provides better accuracy and longer lifetime vs. competitors’ contacting sensor
  • Smooth engine shutdown, plus minimized noise, vibration and harshness
  • Bosch Throttle Bodies are plug and play for easy installation — No flash update is needed
Experiencing Acceleration or Idling Issues? It Might Not be the Throttle Body!

Poor acceleration, hesitation and other idling issues can be caused by failure of a variety of parts. Use the chart below to help determine which part is causing the problem.

PartSystemOther Symptoms
Throttle BodyFuel & Air
Mass Air Flow SensorExhaust & Emission
  • Difficulty Starting or Turning Engine
Air FilterFuel & Air
  • Dark Filter Media
  • Debris in Filter or Filter Box (Change every year!)
Fuel InjectorFuel & Air
Vacuum Hose / ConnectorHoses / Lines & Clamps
  • Hissing, Squealing or Sucking Sound from Cracked Connector or Hose (Use a Vacuum Tester)
Spark Plug or Spark Plug Wire or Ignition Coil Ignition
  • Increase in Exhaust Emissions
  • Visible Wire Damage
  • Oil Leak
Accelerator Pedal Position SensorInterior
  • Limp Mode
  • No / Delayed Pedal Response
Installation Tips
  • Perform OEM Recommended idle relearn procedure. Some applications may require the use of an OBD Scan Tool while others may refer to the Owners Manual.
    • A relearn of idle values can be forced by disconnecting the negative battery cable for several minutes in order to clear the electronic control module's memory.
    • Several minutes of idling and highway driving may be necessary to relearn idle values. Electrical loads such as headlights, AC, radio, etc. should be turned off while relearning.
    • Erratic idle or engine surging after installation of replacement unit may be resolved by putting a load on the engine. If idle evens out after shifting into gear, shift back into park and check idle RPM - perform relearn again if a drivability condition is present.
  • Clean intake manifold mounting surface and replace Intake Manifold Gasket, if necessary.
  • Inspect Air Cleaner Intake Hose for cracks and proper sealing - replace or repair with Multi-Purpose Sealant, if necessary.
  • Check harness for broken wires and wiggle connector to try and reproduce the problem. Replace or clean Connector, if necessary.
  • Clear all diagnostic trouble codes from vehicle computer prior to idle relearn.
OEM / Interchange Numbers: 12633774

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

Regular Inventory Warranty Information:
Limited Lifetime
Warranty Details