FRAM
More Information for FRAM CH10515
{Alternate Inventory Numbers: CH10515:8}
Continue Shopping
 
FRAM CH10515  
$3.81
Price
 $0.00
Core
 + Sold in packs of 1x1
Pack
 $3.81
Total
Add to Cart
Choose
FRAM CH10515close
<
>
Part image
FRAM CH10515 Specifications
Anti-Drain Back ValveNo
Bypass Relief ValveNo
Filter Media MaterialCellulose/Synthetic Blend
Filter TypeCartridge
Height (IN)4.213
Housing ColorNA
Inside Diameter Bottom (IN)1.004
Non Slip GripNo
O-Ring (1) Inside Diameter (IN)0.441
O-Ring (1) Outside Diameter (IN)0.539
O-Ring (1) Thickness (IN)0.098
O-Ring (2) Inside Diameter (IN)0.315
O-Ring (2) Outside Diameter (IN)0.453
O-Ring (2) Thickness (IN)0.138
O-Ring Inside Diameter (in)2.913
O-Ring Outside Diameter (in)3.051
O-Ring Thickness (in)0.138
O-rings includedYes
Outer Diameter Bottom (IN)2.559
Outer Diameter Top (IN)2.559
Replaceable FilterYes
ReusableNo
Top Inside Diameter (IN)1.004
Torque NutNo
WashableNo
Washer Inside Diameter (IN)0.551
Washer Outside Diameter (IN)0.787
Washer Thickness (IN)0.079
Extra Guard; Cartridge Filter
With 10,000 miles of protection, Extra Guard® is the perfect filter for everyday drivers who perform oil changes at OE recommended intervals. Extra Guard® has cellulose and glass blended media that provides advanced engine protection for your vehicle. Engineered with a silicone anti-drain back valve, Extra Guard® meets all manufacturer's recommended change intervals.

Features & Benefits:
  • Fiber and resin blend creates a proprietary filter media to capture 95% of dirt particles that cause harmful engine wear.
  • FRAM Extra Guard provides the perfect balance of dirt-trapping efficiency and dirt-holding capacity.
  • Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles.
Which Oil Filter Is Right For You?

Driving Style
Filter Type Oil Change Intervals Normal City / Highway Heavy Traffic Dirty / Dusty Conditions Extreme Weather Towing
Economy
 3,000 - 5,000 Miles ★        
Standard Replacement
 OEM Recommended ★ ★ ★    
High Performance / Heavy Duty
 OEM Recommended ★ ★ ★ ★ ★

Oil Change Toolbox

Installation Instructions
  • Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
  • Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
  • Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
  • Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
  • Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
  • Apply film of clean oil to filter gasket.
  • Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
  • Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
  • Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
OEM / Interchange Numbers: 263003C250, 263203C250, 263203C300, 263203C30A, 263203C700, 263203F100

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

FRAM Regular Inventory Warranty Information:
Filters - Vehicle Manufacturer's Recommended Service Intervals
Hard Parts - 12 Months
Warranty Details