|
ANCHOR 3098
|
|
$6.50
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$6.50
Total
|
|
|
|
|
|
| ANCHOR 3098 Specifications |
|---|
| Stud | M10x1.5 | | Stud Length | 2.57 in. / 64 mm | | Thread Length | 0.76 in. / 19 mm |
|
|
Anchor Industries has earned a reputation as the automotive aftermarket’s leading supplier of engine and transmission mounts through its commitment to high-quality manufacturing.
Features & Benefits:- Both natural & SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life & performance
- All Rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
- Any included fasteners are made of hardened steel with heat treated Grade # 5 bolts
- A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond
 Tips & Tools For The Repair - Inspect Motor Mounts (found in the "Engine" category) for signs of wear. Transmission and Motor Mounts typically wear at the same rate
- The original mount bolts can be difficult to remove. Apply Penetrating Oil and have a Breaker Bar handy to help break them loose
- Find a solid part of the transmission to place the Jack under. Do not use the fluid pan, it is not strong enough to support the weight of the transmission
- Apply Blue Threadlocker to mount bolts prior to installation to prevent backing out due to the high vibrations transmission mounts are subject to
 Additional Resources
What Happens When Mounts Fail
Failure Signs and Diagnosis
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).ANCHOR Regular Inventory Warranty Information:12 Months |
|
