BENDIX
More Information for BENDIX BPR5860
Continue Shopping
 
BENDIX BPR5860  
$56.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$56.79
Total
(Only 1 Remaining)
BENDIX BPR5860close
<
>
Part image
Sold Individually
BENDIX BPR5860 Specifications
Bolt Circle (MM)120
Bolt Hole Diameter (MM)16.30
Bolt Holes5
Center Hole Diameter (MM)75
Discard Thickness (MM)23.40
Nominal Thickness (MM)25
Outside Diameter (MM)324.80
Overall Height (MM)61.10
Vented or SolidVented
Coated
Bendix Priority1 coated rotors are designed to meet OE specifications for fit, form and function to provide safe, consistent and reliable performance.

Features:
  • Surface-Lok Silver coating is heat resistant and extends friction and rotor life by limiting corrosion build-up
  • Quiet braking with ultra-smooth pad-to-rotor contact improving pedal response for safe driving in all conditions
  • OEM style vane configurations maximize heat dissipation which speeds up the cooling process, eliminating noise and increasing performance
  • Designed to exacting OEM specifications and tested for balance, ensuring safe operation
  • Edge coded with the proper discard thickness which identifies when the rotor has reached the end of it's useful life

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function



Attention California Customers - WARNING: Cancer and Reproductive Harm


BENDIX Warranty Information:
12 months/12,000 miles