AUTO EXTRA
More Information for AUTO EXTRA AX900564
{Alternate Inventory Numbers: AX900564:8}
Continue Shopping
 
AUTO EXTRA AX900564  
$65.89
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$65.89
Total
[Wholesaler Closeout -- 30 Day Warranty]
AUTO EXTRA AX900564close
<
>
Part image
AUTO EXTRA AX900564 Specifications
Abs Tone Ring IncludedYes
Cross DrilledNo
Directional or Non-Directional Brake SurfaceNon-Directional
Discard Thickness (IN)1.43
Discard Thickness (MM)36.4
Inner Bearing Cup IncludedYes
Mounting Bolt Hole Circle Diameter (IN)6.69
Mounting Bolt Hole Circle Diameter (MM)170
Nominal Thickness (IN)1.5
Nominal Thickness (MM)38
Outer Bearing Cup IncludedYes
Overall Height (IN)4.55
Overall Height (MM)115.6
Rotor Outside Diameter (IN)13.66
Rotor Outside Diameter (MM)347
Rust Resistant CoatingNo
SlottedNo
Solid Or Vented Type RotorVented
Stud Quantity8
Stud Thread Size (MM)M14 x 1.5
Wheel Studs IncludedYes
Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function



Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

AUTO EXTRA Regular Inventory Warranty Information:
30 days