RAYBESTOS
More Information for RAYBESTOS RC11586
Continue Shopping
 
RAYBESTOS RC11586  
$39.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$39.79
Total
[Wholesaler Closeout -- 30 Day Warranty] (Only 1 Remaining)
RAYBESTOS RC11586close
<
>
Part image
Sold Individually
RAYBESTOS RC11586 Specifications
Bleeder Screw Thread3/8"-24
Caliper Bracket Mounting Hole Size (MM)16.000
Caliper Bracket Mounting Hole Thread Pitch (MM)2.000
Caliper Casting MaterialCast Iron
Caliper ConfigurationLoaded (Includes Pads)
Caliper Piston Diameter (MM)59.900
Caliper Piston Quantity2
Caliper TypeFloating
Friction MaterialMetallic
Manufacturing TypeRemanufactured
Surface FinishPlain
R-Line
The Raybestos R-Line Reman Non-Plated Brake Calipers are engineered to deliver safe, leak-free performance.

Features & Benefits:
  • OE-matched design and specifications
  • Seals, boots, bleeder screws and o-rings are replaced to guarantee leak free performance
  • EPDM70 rubber components included for superior heat resistance, performance and durability
  • Pre-lubricated guide pins included

Raybestos works tirelessly to ensure their calipers are tested to the highest multinational industry standards to ensure you receive a high quality product. The testing parameters include:

  • High and low-pressure leak testing
  • Extreme pressure strength and leak testing
  • Cyclic durability under extreme temperatures
  • Piston retraction, fluid displacement and residual drag torque
  • Rubber aging and degradation resistance
Installation Tips
  • Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
  • Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
  • Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
  • Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
  • After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
  • After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid

Attention California Customers - Warning: This product can expose you to chemicals including silica, which is known to the state of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.


Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

Regular Inventory Warranty Information:
18 Months / 18,000 Miles