|
CENTRIC 30609890
|
|
$37.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$37.79
Total
|
|
[ Wholesaler Closeout -- 30 Day Warranty] (Only 1 Remaining) |
|
|
| Brake Pads are sold as a set. Quantity of one (1) is for both wheels |
| CENTRIC 30609890 Specifications |
|---|
| Friction Material Bonding Type | Integrally Molded | | Friction Material Composition | Semi-Metallic | | Inner Pad Height (IN) | 2.744 | | Inner Pad Height (MM) | 69.700 | | Inner Pad Width (IN) | 8.591 | | Inner Pad Width (MM) | 218.200 | | Mounting Hardware Included | Yes | | Notes | 4 Pads with 1 Wear Sensor / Clip | | Outer Pad Height (IN) | 2.744 | | Outer Pad Height (MM) | 69.700 | | Outer Pad Width (IN) | 8.591 | | Outer Pad Width (MM) | 218.200 | | Pad Quantity | 4 | | Pad Shims Included | Yes | | Pad Wear Sensor Included | Yes | | Prepared For Pad Wear Sensor | Yes |
|
|
| Fleet Performance Pads; Posi Quiet XT; Includes Hardware |
Centric Fleet Performance brake pads are specifically engineered to perform in pursuit, rescue, and emergency driving conditions. The Fleet Performance pad can safely stop vehicles from high speeds and will continue to work at very high temperatures.
Features & Benefits:
- Para-aramid composites provides linear response, regardless of pad temperature
- 100% positive molded for uniform friction material density
- Specially engineered for pursuit, rescue and emergency, driving
- Post cured for consistent performance throughout the, service life of the brake pad
- Scorched to raise initial cold effectiveness and easy bed-in
- Hardware included, where applicable
- 100% Asbestos-free formulas
Installation Tips
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
 Installation Tips - Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - https://www.p65warnings.ca.gov/
Attention California Customers - WARNING: Cancer and Reproductive Harm
|
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).CENTRIC Regular Inventory Warranty Information:90 days/3,000 miles |
|
