More Information for CENTRIC 10508480

{Alternate Inventory Numbers: 105.08480}

Continue Shopping

CENTRIC 10508480

$15.76

Price

$0.00

Core

+ Sold in packs of 1x1

Pack

$15.76

Total

Add to Cart

Choose

Point to Zoom

Brake Pads are sold as a set. Quantity of one (1) is for both wheels

CENTRIC 10508480 Specifications
Friction Material Bonding Type	Integrally Molded
Friction Material Composition	Ceramic
Inner Pad Height (IN)	2.846
Inner Pad Height (MM)	72.300
Inner Pad Width (IN)	2.720
Inner Pad Width (MM)	69.100
Mounting Hardware Included	Yes
Outer Pad Height (IN)	2.846
Outer Pad Height (MM)	72.300
Outer Pad Width (IN)	2.720
Outer Pad Width (MM)	69.100
Pad Quantity	4
Pad Shims Included	Yes
Pad Wear Sensor Included	No
Prepared For Pad Wear Sensor	Yes

Posi-Quiet; Ceramic; Includes Hardware

Features & Benefits:

Application specific formulations
Precision cut or shaved backing plates and mechanically attached shims ensure proper fitment in the caliper and virtually eliminate noise associated with pad vibration
Positive molding process uses extreme pressure to compress the friction material and bond it to the backing plate. This assures consistent friction material density throughout the pad; resulting in even wear and performance characteristics throughout the life of the brake pad
Includes hardware (where required)

Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?

A common question many drivers have when shopping for brake pads is �What is the difference between the different brake pad materials?� While all brake pads will stop your vehicle, there are pros and cons of each pad material:

Brake Pad Material	Cost	Dust Level	Noise Level	Stopping Power	Pad Life
Organic	$
Semi-Metallic	$$
Ceramic	$$$

Installation Tips

Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Attention California Customers - https://www.p65warnings.ca.gov/

Attention California Customers - WARNING: Cancer and Reproductive Harm

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

CENTRIC Regular Inventory Warranty Information:
90 days/3,000 miles