More Information for MOTIVE GEAR V885LX

{Alternate Inventory Numbers: V885411LX}

Continue Shopping

Point to Zoom

MOTIVE GEAR V885LX Specifications
Cover Bolt Quantity	9
Differential Carrier Break	2.73 Ratio and Lower
Pinion Gear Tooth Quantity	10
Pinion Spline Count	27
Ring & Pinion Gear Ratio	4.11
Ring Gear Bolt Quantity	10
Ring Gear Diameter	8.25"
Ring Gear Material	8620 Steel
Ring Gear Rotation	Standard
Ring Gear Tooth Quantity	41
Splined Bore Diameter	1.19"

Performance

Features:

Engineered to Motive Gear's specifications using a proprietary European spec'd alloy
Central contact pattern with tooth index spacing for strong and quiet perfofmance
Cutting edge double-lapping products quieter and cooler running gears
Full CNC production from start to finish for consistency, which produces a gear set that is quicker and easier to set up
Computer controlled heat treating for consistent depth and hardness

Differential Identification Guide

To order the correct ring & pinion, it's crucial to know the differential type and gear ratio on your vehicle.

First, determine your Differential Type.
Next, determine the gear ratio on your vehicle using one of the following methods:
- Count The Teeth: Divide the number of teeth on the ring gear (big gear) by the number of teeth on the pinion gear (small gear). If you have 37 teeth on your ring gear and 12 teeth on your pinion gear, you have a 3.08 Gear Ratio (37 � 12 = 3.08).
- Verify Through A Dealer: Verify the ratio using your VIN number. This will only be accurate if the differential has not been previously modified.

Additional Resources

Attention California Customers - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Warranty Information:
2 Years or 100,000 Miles