ENGINETECH
More Information for ENGINETECH BB1011
{Alternate Inventory Numbers: BB1011.50, BB1011STD, BB101125}
Continue Shopping
 
ENGINETECH BB1011  
Choose Size Below
Price
Core
Pack
Total
Choose Size:
  •  
  • 0.50MM Undersize ($29.79) Warehouse
  • 0.25MM Undersize (Only 1 Remaining) ($31.79) Warehouse
  • Standard (Only 1 Remaining) ($31.79) Warehouse
ENGINETECH BB1011close
Part image
ENGINETECH BB1011 Specifications
Housing Bore2.1654-2.1659 in
Number of Bearings6
Oil Clearance0.0013-0.0023 in
Shaft Diameter2.0455-2.0462 in
Wall Thickness0.0587-0.0593 in
Width0.673 IN
Set
Enginetech main & rod bearings have been the choice of rebuilders for over 25 years. About ten years ago, when aluminum bearings were first being introduced, Enginetech continued to produce the higher quality tri-metal 780 bearings. Enginetech stuck firm with the 780 tri-metal material for years because it was far superior to the early aluminum bearing technology.

Advanced technology in the last few years has produced huge improvements in aluminum bearings. The additions of high amounts of silicon dispersed within aluminum alloys have moved aluminum-silicone bearing material to the preferred bearing status. The performance of new aluminum-silicone alloys is now equal to or better than the original tri-metal designs. Due to the new advances in aluminum-silicon bearing technology Enginetech is converting most of our main & rod bearings to the advanced aluminum-silicon material.

Attention California Customers - Warning: This product may expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

OEM / Interchange Numbers: RB644

ENGINETECH Warranty Information:
Stock / Standard Replacement Parts: 12 months / 12,000 miles; High Performance Parts: No Warranty
Warranty Details