DELPHI TA5407
|
|
$29.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$29.79
Total
|
|
|
|
DELPHI TA5407 Specifications |
---|
Adjustable | No | Bearing Material | Polyoxymethilen (POM) | Color | Black | Cone Outside Diameter (IN) | 0.59 | Cone Outside Diameter (MM) | 15.0 | Dust Boot | Yes | Dust Boot Material | Choloroprene Rubber (CR) | End 1 Gender | Male | End 1 Thread Diameter (IN) | 0.551 | End 1 Thread Diameter (MM) | 14.0 | End 1 Thread Direction | Clockwise (Right) | End 1 Thread Pitch (MM) | 1.5 | End 2 Gender | Female | End 2 Thread Diameter (IN) | 0.63 | End 2 Thread Diameter (MM) | 16.0 | End 2 Thread Direction | Clockwise (Right) | End 2 Thread Pitch (MM) | 2.0 | Finish | Coated | Grade | Standard | Greasable | Yes | Grease Fitting Included | Yes | Height (MM) | 36.1 | Housing Material | Steel | Length (MM) | 380.5 | Length Stud Center to End (IN) | 12.34 | Length Stud Center to End (mm) | 313.5 | Mounting Hardware Included | Yes | Position(s) | Inner | Pre Greased | Yes | Stud Type | Threaded | Tie Rod Material | Steel | Type | Straight | Weight (lb) | 1.32 | Width (MM) | 36.1 |
|
|
Features:- Extensive dimensional and material analysis to ensure the very best compatibility to the Original Equipment (OE) part
- Tested alongside the OE part for 250,000 cycles to check braking force, cornering force and suspension travel movement, to ensure the part performs like the OE
- Able to withstand temperatures below -40ºC and over 120ºC, helping to ensure they perform even under the harshest conditions
- Parts exposed to 720 hours of salt spray for optimum protection against corrosion
- Additional cataphoretic coating for greater protection against corrosion and enhanced aesthetics
Attention California Customers - WARNING: This product can expose you to chemicals including Carbon Black, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
|
OEM / Interchange Numbers: 12479168, 19149613, 19257595 |
Warranty Information:Limited Lifetime |
|