The only drop-in assembly that provides proper max line at WOT (wide open throttle).
Features:
Easy, drop-in fix for worn actuator feed limit bores
No reaming
No special tooling
Cost effective drop-in fix that installs in minutes
Works best when used with SK4T65E
Corrects/Prevents/Reduces:
Code P1811 – maximum adapt
Wrong gear starts
Ratio codes HOT
TCC slip
Includes:
Drop-in AFL sleeve, valve and spring
Tech Note: During installation of the new bushing, it might be tight due to the wear ridge. If necessary, use either end of the old valve to push the new bushing into place. Once installed, the bushing never moves in the bore, so it’s alright if it’s tight.
Videos
How To Install The GM 4T65 Actuator Feed Limit Valve
If you are having trouble choosing the correct TransGo part, or have questions before, during or after installation of this part, TransGo's ASE Certified Technicians are available to help.