Dorman's Mass Air Flow Sensor is engineered for affordability and convenience. Replacement restores the engine to proper operation by determining the most efficient air/fuel mixture for achieving clean burns.
Constructed from high-quality materials to successfully resist damage from extreme underhood temperatures and environmental factors, such as humidity
Direct fit for a trouble-free replacement
Comes with a torx bit for ease of installation (sensor only)
Engineered from entirely new materials for cost efficiency
Check for Vacuum Leaks First!
Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:
Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
Cracked Intake Boot (found in the "Engine" category)
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).Regular Inventory Warranty Information:Limited LifetimeWarranty Details
Check for Vacuum Leaks First!
Videos
Additional Resources
RockAuto Newsletter: