Standard (Only 6 Remaining) ($19.26/Each)x6 $115.56
0.50MM Oversize (Out of Stock)
0.75MM Oversize (Out of Stock)
1.00MM Oversize (Out of Stock)
ENGINETECH P3038
Point to Zoom
ENGINETECH P3038 Specifications
Alloy
Hypereutectic
Bore Diameter
3.800
Bore Diameter
96.50
Clearance
0.0013
Compression Height
1.090
Height
0.484 IN
Oil Ring Thickness
2.00 MM
Piston Compression Ratio
9.2:1
Piston Pin Outside Diameter
0.8662
Recess
0.050 IN
Second Compression Ring Thickness
1.50 MM
Top Compression Ring Thickness
1.20 mm
Recessed Top; Hypereutectic; Coated Skirt
Enginetech pistons are manufactured with state of the art materials to match OE requirements.
Features:
Made from Hypereutectic alloy for increased strength and scuff resistance over cast pistons
Skirt coated for longer life and increased horsepower
Machined (where appropriate) for a very smooth finish
Includes a mechanism to enable oil distribution for pin lubrication to prevent them from locking up (pin starvation of oil is one of the leading causes of engine failures)
All oil return slots are chamfered to prevent stress cracking from forming at any unfinished angles
Why Choose Enginetech Pistons?
Attention California Customers - Warning: This product may expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
OEM / Interchange Numbers: H840P
ENGINETECH Warranty Information:Stock / Standard Replacement Parts: 12 months / 12,000 miles; High Performance Parts: No WarrantyWarranty Details