|
DEA / MARMON RIDE CONTROL A4059
|
|
$38.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$38.79
Total
|
|
|
|
|
|
| DEA / MARMON RIDE CONTROL A4059 Specifications |
|---|
| Bushing Material | Rubber | | Mount Material | Aluminum, Steel, Rubber | | Mounting Bracket Included | No | | Mounting Hardware Included | No | | Mounting Hole Quantity | 1 | | Per Vehicle Quantity | 1 | | Stud Quantity | 0 | | Type | Solid |
|
|
Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of engine and transmission mounts for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you'll be installing a mount that will meet or exceed your original mount's specifications.
Testing Includes:- Visual Inspection
- Visual / Finish
- Paint / Rubber Appearance
- Weld Integrity
- Dimensional Verification
- Dimensions tested / approved using CMM (machine which takes readings in six degrees of freedom and displays these readings in mathematical form)
- Elastomer / Durometer Tested
- Rubber Hardness Check
- Every shipment inspected thoroughly
- Supplier verification on site
- Rubber Tensile Strength tested
- Strip sample and test of rubber processing
- Supplier must submit test report and sample from every batch
- On-site audits to verify process capabilities
- Thermogravimetric Analysis
- TGA / Rubber Compression Tests (changes in physical and chemical properties of mount materials are measured as a function of increasing temperature (with constant heating rate), or as a function of time (with constant temperature and/or constant mass loss))
- Rheometer / Vulkameter tested (measure the way rubbers respond to applied forces)
- Supplier must submit test report and sample from every batch
- On-site audits to verify process capabilities
 Tips & Tools For The Repair - Inspect Motor Mounts (found in the "Engine" category) for signs of wear. Transmission and Motor Mounts typically wear at the same rate
- The original mount bolts can be difficult to remove. Apply Penetrating Oil and have a Breaker Bar handy to help break them loose
- Apply Blue Threadlocker to mount bolts prior to installation to prevent backing out due to the high vibrations transmission mounts are subject to
|
| OEM / Interchange Numbers: 22316751760, 22316754088, 22316764211, 22316764212, 22316771742, 22316771743 |
DEA / MARMON RIDE CONTROL Warranty Information:Limited Lifetime |
|
