High-Grade dual bridge stainless steel construction
Meets all OEM specifications
High-Flow
Increase in coolant flow
Reduces engine warm-up time
Stabilizes cooling system pressure
Allows trapped cooling system air to escape
Triple-Bridge design increases strength, stability, and reliability
Wider opening allows up to 60% more coolant flow
Added bypass valve allows a small amount of coolant to circulate before fully opening
Jiggle valve removes air pockets
Fail-Safe
In overheating situations, the Fail-Safe thermostat automatically locks in the open position, delivering maximum coolant to the engine
When standard thermostats fail, they lock in the closed position, prevent coolant flow and possibly cause serious damage to your engine. The Fail-Safe thermostat has a patented safeguard against overheating damage. Upon system failure, the Fail-Safe locks in the open position. Coolant flows freely. Helps protect the engine in the event of overheating.
Which Thermostat Is Right For You?
Type
Lifespan
Flow Rate
Precise Temperature Control
Fail-Safe Engine Protection
Economy
★
★
★
Standard Replacement
★★
★
★★
Performance
★★
★★
★★
Heavy Duty
★★★
★★
★★★
Premium
★★
★
★★
★
What Temperature Thermostat Do I Need?
Thermostats have a “rated” temperature (such as 180F or 195F). This is the temperature the thermostat will start to open, releasing heated coolant from the engine into the radiator. The thermostat will fully open once the coolant gets another ten or fifteen degrees warmer.
OE TEMPERATURE
These thermostats match the OEM-specified temperature rating for the vehicle. Manufacturers recommend an OE temperature thermostat for most engines, especially for:
Modern engines with computers that use the coolant temperature to help control the fuel, emissions and other important systems
ALTERNATE TEMPERATURE
These thermostats have a temperature rating below (cooler than) the OEM-specified temperature rating for the vehicle. This option may make sense for use in:
Modified Engines
Performance Applications
Older / Classic Vehicles
Cooling System Maintenance | Tips & Tools
Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:
Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
Consider replacing the Radiator Hoses (and Hose Clamps) and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).MOTORAD Regular Inventory Warranty Information:12 Months
Which Thermostat Is Right For You?
What Temperature Thermostat Do I Need?
Cooling System Maintenance | Tips & Tools
Videos