|
BENDIX 141316
|
|
$16.38
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$16.38
Total
|
|
|
|
|
|
|
|
|
Bendix Premium Drums & Rotors- Engineered to ensure proper fit and function for quick out of the box, trouble-free installation.
- OE vane design and configuration as well as minimum thickness and nominal thickness specifications.
- Rotor friction surfaces are double disc ground virtually eliminating runout and thickness variation which causes pedal pulsation.
- Smooth non-directional surface finish provides proper pad and rotor contact ensuring consistent braking performance.
 Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).BENDIX Regular Inventory Warranty Information:12 months/12,000 miles |
|
