|
SKP SKMA2672
|
|
$4.42
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$4.42
Total
|
|
|
|
|
|
|
|
|
SKP mounts are premium products for less, meeting or exceeding OEM quality standards.
Features & Benefits:- Natural and SBR (Styrene Butadiene) rubber provide abrasion resistance and aging stability to ensure maximum life and performance
- All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's requirements
- Any included fasteners are made of hardened steel with heat-treated Grade #5 bolts
Testing Methods:- Tensile Strength and Compression: Tests the fracture initiation resistance
- Durability: Tests the service life under conditions of use and maintenance
- Low-Temp Aging: Tests the service life under conditions below a set low-temp
- High-Temp Aging: Tests the service life under conditions above a set high-temp
- Ozone Resistance: Tests service life under conditions above certain ozone levels
- Hardness: Tests the properties of the surface hardness of solid materials
- Salt/Fog: Tests the corrosion resistance of materials and coatings
 Tips & Tools For The Repair - Inspect Motor Mounts (found in the "Engine" category) for signs of wear. Transmission and Motor Mounts typically wear at the same rate
- The original mount bolts can be difficult to remove. Apply Penetrating Oil and have a Breaker Bar handy to help break them loose
- Find a solid part of the transmission to place the Jack under. Do not use the fluid pan, it is not strong enough to support the weight of the transmission
- Apply Blue Threadlocker to mount bolts prior to installation to prevent backing out due to the high vibrations transmission mounts are subject to
Attention California Customers - Warning: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
|
| OEM / Interchange Numbers: 0E6TZ6038E, E4TZ6038F, E6TZ6038D |
SKP Warranty Information:12 Months |
|
