|
SPECTRA PREMIUM SP7049M
|
|
$62.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$62.79
Total
|
|
[ Wholesaler Closeout - Private Label Pkg. - 30 Day Warranty] (Only 1 Remaining) |
|
|
| The float arm (where pictured) may ship detached to prevent damage in transit. To connect, simply snap the wire end into the sender hole. |
| SPECTRA PREMIUM SP7049M Specifications |
|---|
| Description | Fuel Pump Module Assembly | | Gaskets Included | Yes | | Height (IN) | 14.7 | | Max Pressure Range (Psi) | 54 | | Max Free Flow (Gph) | 58 | | Resistance Empty (Ohms) | 102 | | Resistance Full (Ohms) | 5 | | Rheostat Range (Ohms) | 102-5 | | Inlet Quantity | 1 | | Inlet Type | Quick Connect | | Inlet Diameter (IN) | 5/16 | | Outlet Quantity | 1 | | Outlet Type | Quick Connect | | Outlet Diameter (IN) | 3/8 | | Compatible Fuels | Gas | | Wiring Harness Included | No | | Hardware Included | Yes | | Min Free Flow Rate (Gph) | 50 | | Min Pressure Range (Psi) | 48 | | Strainer Included | Yes | | Pin Count | 5 | | Pin Shape | Round | | Connector Shape | Oval | | Connector Gender | Male | | Inline Pump | No | | In Tank | Yes | | Negative Ground | Yes | | Pump Type | Turbine | | Volts | 12 vDC |
|
|
Spectra's Longer-Life Fuel Pump Assembly Filter
Although Fuel Pump Assemblies have significantly evolved over the past 10 years, fuel system contamination
is still the number one cause of failure for this product type.
Newer design fuel pump assemblies now integrate
additional vehicle components that were previously part of the fuel system. The in-line fuel filter is one of the many components now incorporated for late model applications.
As a result, this ensures a debris-free filter is installed on every fuel pump assembly replacement.
Spectra Premium's design integrates a longer life fuel filter which provides an all-in-one solution during
the replacement of the fuel pump assembly.
Filter Specifications:
- Expected life is about 150,000 miles, under normal driving conditions (Filter is not replaceable)
- Filter micro rating: 20 micro
Late Model Applications:
- Incorporated in late model designs covering GM light-duty trucks, Chrysler Van, and Honda cars & SUVs.
Tested at External Laboratory:
- Internal fuel filters are tested and validated at approved third party labs for:
- First pass efficiency
- Dirt holding capacity
Not All Fuel Pumps Are Created Equal!
 |
Learn the difference between high quality fuel pumps versus remarkably cheap, low quality fuel pumps.
Read Now |
 Benefits of Purchasing a Fuel Pump & Housing Assembly Purchasing just the fuel pump is less expensive up-front, but a complete Fuel Pump & Housing Assembly provides added benefits:
- Extend Service Life: New strainer(s), hoses, sensors and other components help resolve problems that could be caused by more than just the pump.
- Reduce Install Time: Since you don't have to disassemble the housing, which could lead to damage, replacement becomes a simple swap, dramatically reducing installation time.
- Save Money: The cost of the assembly is often cheaper than buying the components individually, and means you only have to do the job once.
 Prevent Premature Fuel Pump Failure Preventing premature fuel pump failure is far less expensive and time consuming than continuing to replace the pump. There are three common causes for premature fuel pump failure:
| ELECTRICAL ISSUES |
Poor electrical connections will mimic symptoms of a failed pump, sometimes resulting in unnecessary replacement. Before replacing the pump:
- Use a Fuel System Tester to test pump pressure is within expected range
- Use an Electrical Tester to test for bad wiring, burnt or corroded connectors
- Check / Replace faulty Fuse(s) and Relay
BEFORE REPLACEMENT |
| FUEL CONTAMINATION |
Dirt, rust or debris in the fuel can clog strainers and stick to internal pump components. When replacing the pump:
- Replace Fuel Filter or Fuel Strainer
- Empty and clean the tank with Fuel Tank Cleaner
- Fill tank with fresh, uncontaminated fuel of appropriate grade
DURING REPLACEMENT |
| PUMP DAMAGE / OVERHEATING |
Running low on gas causes your fuel to heat up quicker, and your pump to work harder. After replacing the pump:
- Maintain at least 1/4 tank of fuel and use a Fuel Additive / Conditioner to keep pump cool and lubricated
- If vehicle is stored without use, drain tank to prevent pump corrosion from fuel oxidation
AFTER REPLACEMENT |
 Additional Resources
Fuel System Diagnostic Check-List
Types of Fuel Pump Failure NOT Covered by Warranty
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
| OEM / Interchange Numbers: 4728729, 52004835, 52004933, 52017632, 52017636, 52017639, P114M |
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).Regular Inventory Warranty Information:Limited Lifetime - Lock Ring and Seal Must Be Replaced and Fuel Tank Must Be Inspected And Clean Prior To Installation |
|
