|
LARES 11031
|
|
$392.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$392.79
Total
|
|
|
|
|
|
| LARES 11031 Specifications |
|---|
| Inlet Port Thread Diameter | 1/2-20 Inch | | Input Shaft Diameter | 0.62 Inch | | Input Shaft Diameter | 15mm | | Mounting Hole Quantity | 3 | | Outlet Port Thread Diameter | 3/8 Inch | | Output Shaft Diameter | 1.25 Inch | | Output Shaft Diameter | 32mm | | Total Turns Lock To Lock | 3-1/2 |
|
|
Lares New Power Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and hydraulically tested.
 Installation Tips - Replace Power Steering Pressure and Return Hoses when replacing the steering gear. Steering hoses can degrade internally and cause contamination in the power steering system, which can damage the new rack & pinion
- Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
- Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
- Bleed the system to prevent noise and extend the life of the steering components
 Technical Support Lares offers technical support for all of their products. Misdiagnosis is common on steering components and the technicians can help you determine if your part is the problem.
📞 Phone: 1-800-555-0638
Attention California Customers - Warning: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
|
| OEM / Interchange Numbers: 3643333, 3879924, 5020106 |
Warranty Information:Limited Lifetime (Commercial Vehicles - 12 Months)Warranty Details |
|
