BBB Industries markets and sells their products under various brand names, including Genco, Vision-OE and Wilson. The product inside the box is the same, no matter what brand name appears on the box.
BBB INDUSTRIES N5020106 Specifications
Inlet Size
6.4mm (1/4) Pipe
Input Shaft Diameter (IN)
0.63
Input Shaft Diameter (MM)
16.02
Input Shaft Length (IN)
1.5
Input Shaft Length (MM)
38
Input Shaft Spline Count
35
Installation Kit Included
Yes
Manual or Power
Electric
Mounting Hole Quantity
3
New Or Remanufactured
New
Outlet Size
1/2x20
Output Shaft Diameter (IN)
1.25
Output Shaft Diameter (MM)
31.75
Output Shaft Spline Quantity
32
Output Shaft Thread Size
7/8/2014
Pressure Port Attachment Type
Flare
Pressure Port Size
1/2x20
Pressure Port Thread Size
6.4mm (1/4) Pipe
Return Port Attachment Type
Pipe
Return Port Thread Size
1/2x20
Total Turns Lock To Lock
3.5
BBB products are manufactured using 100% premium parts and are built and tested to meet or exceed OE standards. BBB does not substitute adapted, converted or “will fit” components, which means that the new unit is an exact replacement for the original equipment part.
Installation Tips
Replace Power Steering Pressure and Return Hoses when replacing the steering gear. Steering hoses can degrade internally and cause contamination in the power steering system, which can damage the new rack & pinion
Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
Bleed the system to prevent noise and extend the life of the steering components
Installation Tips
Videos