FRAM
More Information for FRAM PH3335
Continue Shopping
 
FRAM PH3335  
$16.49
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$16.49
Total
FRAM PH3335close
<
>
Part image
FRAM PH3335 Specifications
Anti-Drain Back ValveNo
Bypass Relief ValveNo
Drain Plug IncludedNo
Filter TypeSpin-On Canister
Gasket Inside Diameter (IN)3.720
Gasket or Seal IncludedYes
Gasket Outside Diameter (IN)4.290
Gasket Thickness (IN)0.280
Gasket TypeBase
Height (IN)12.100
Housing ColorOrange
Inlet TypeThreaded
Inside Thread Diameter (IN)1 1/2-16
Non Slip GripNo
Outside Diameter (IN)5.438
ReusableNo
Thread SizeStandard
Torque NutNo
Wearguard HD Spin-on; Includes Gasket
With 10,000 miles of protection, Extra Guard® is the perfect filter for everyday drivers who perform oil changes at OE recommended intervals. Extra Guard® has cellulose and glass blended media that provides advanced engine protection for your vehicle. Engineered with a silicone anti-drain back valve, Extra Guard® meets all manufacturer's recommended change intervals.

FRAM Extra Guard provides the perfect balance of dirt-trapping efficiency and dirt-holding capacity.

Features & Benefits:

  1. SureGrip: Provides non slip surface for easier installation and removal.
  2. Media: Fiber and resin blend creates a proprietary filter media to capture 95% of dirt particles that cause harmful engine wear.
  3. Anti-Drainback Valve: Silicone anti-drainback valve delivers superior start-up engine protection with up to 3X the hot oil resistance.
  4. Gasket: Internally lubricated sealing gasket for easier filter removal.

Which Oil Filter Is Right For You?

Driving Style
Filter Type Oil Change Intervals Normal City / Highway Heavy Traffic Dirty / Dusty Conditions Extreme Weather Towing
Economy
3,000 - 5,000 Miles        
Standard Replacement
OEM Recommended    
High Performance / Heavy Duty
OEM Recommended

Oil Change Toolbox

Installation Instructions
  • Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
  • Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
  • Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
  • Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
  • Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
  • Apply film of clean oil to filter gasket.
  • Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
  • Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
  • Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
OEM / Interchange Numbers: 12335, 12490136, 1R0716, 1R1808, 25014776, 2721788, 2P4005, 2Y8097, 3632030, 3I1284, 3I1293, 4W6000, 6439658, 7W5497, 8T7452, KW691, LW691

FRAM Warranty Information:
Filters - Vehicle Manufacturer's Recommended Service Intervals
Hard Parts - 12 Months
Warranty Details