|
DORMAN 2630370
|
|
$86.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$86.79
Total
|
|
|
|
|
|
| The float arm (where pictured) may ship detached to prevent damage in transit. To connect, simply snap the wire end into the sender hole. |
| DORMAN 2630370 Specifications |
|---|
| Average Current Draw | 6 | | Average Flow Rating | 120 gph | | Connector Color | Black | | Connector Gender | Female | | Connector Shape | Oval | | Fuel Filter Included | Yes | | Fuel Sending Unit Included | Yes | | Fuel Tank Pressure Sensor Included | Yes | | Fuel Type | Gas | | Gasket or Seal Included | Yes | | Gasket Or Seal Material | Rubber | | Height (MM) | 270 | | Housing Length (MM) | 240 | | Housing Material | Plastic | | Housing Width (MM) | 121 | | In Tank or External | In Tank | | Inlet Outside Diameter (MM) | 7.9 | | Inlet Quantity | 1 | | Inlet Type | Male | | Internal Or External Strainer | External | | Length (MM) | 158 | | Lock Ring Included | No | | Maximum Flow Rating | 42 GPH | | Maximum Pressure (PS) | 62 | | Minimum Flow Rating (GP) | 30 | | Minimum Free Flow Rate (GP) | 30 | | Minimum Pressure (PS) | 43 | | Mounting Hardware Included | Yes | | Negative Ground | Yes | | Outlet Diameter | 7.9 mm | | Outlet Outside Diameter (MM) | 7.9 | | Outlet Quantity | 1 | | Outlet Type | Flanged | | Package Contents | 1 Fuel Pump Module Assembly; 1 Harness; 4 Butt Connectors; 1 Tank Seal; 1 O-ring | | Pump Design | Main | | Pump Type | Electric | | Regulator Included | No | | Resistance Ohms Empty | 40 | | Resistance Ohms Full | 250 | | Strainer Included | Yes | | Terminal Gender | Male | | Terminal Quantity | 4 | | Terminal Type | Blade | | Top Mount Diameter (MM) | 121 | | Voltage (2H) | 12 | | Width (MM) | 113 | | Wire Gauge Measurement | 1.5 | | Wire Harness Included | Yes | | Wire Quantity | 4 | | Wiring Harness Length (IN) | 12 |
|
|
Dorman's Fuel Pumps supplies fuel from the tank to the engine. For added convenience many of Dorman's Fuel Pumps include sending units and gaskets for a complete repair. Features & Benefits:- Direct replacement
- Manufactured to strict engineering quality standards
- No special tools required
- Constructed of high quality materials for durability
 Benefits of Purchasing a Fuel Pump & Housing Assembly Purchasing just the fuel pump is less expensive up-front, but a complete Fuel Pump & Housing Assembly provides added benefits:
- Extend Service Life: New strainer(s), hoses, sensors and other components help resolve problems that could be caused by more than just the pump.
- Reduce Install Time: Since you don't have to disassemble the housing, which could lead to damage, replacement becomes a simple swap, dramatically reducing installation time.
- Save Money: The cost of the assembly is often cheaper than buying the components individually, and means you only have to do the job once.
 Prevent Premature Fuel Pump Failure Preventing premature fuel pump failure is far less expensive and time consuming than continuing to replace the pump. There are three common causes for premature fuel pump failure:
| ELECTRICAL ISSUES |
Poor electrical connections will mimic symptoms of a failed pump, sometimes resulting in unnecessary replacement. Before replacing the pump:
- Use a Fuel System Tester to test pump pressure is within expected range
- Use an Electrical Tester to test for bad wiring, burnt or corroded connectors
- Check / Replace faulty Fuse(s) and Relay
BEFORE REPLACEMENT |
| FUEL CONTAMINATION |
Dirt, rust or debris in the fuel can clog strainers and stick to internal pump components. When replacing the pump:
- Replace Fuel Filter or Fuel Strainer
- Empty and clean the tank with Fuel Tank Cleaner
- Fill tank with fresh, uncontaminated fuel of appropriate grade
DURING REPLACEMENT |
| PUMP DAMAGE / OVERHEATING |
Running low on gas causes your fuel to heat up quicker, and your pump to work harder. After replacing the pump:
- Maintain at least 1/4 tank of fuel and use a Fuel Additive / Conditioner to keep pump cool and lubricated
- If vehicle is stored without use, drain tank to prevent pump corrosion from fuel oxidation
AFTER REPLACEMENT |
 Additional Resources
Do I have Federal or California Emissions?
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
| OEM / Interchange Numbers: 19121627, 19121632, 19153712, 25314655, 25315817, 25345028 |
|
