CENTRIC
More Information for CENTRIC 30113450
{Alternate Inventory Numbers: 301.13450, 301-13450, P30113450}
Continue Shopping
 
CENTRIC 30113450  
$19.37
Price
 $0.00
Core
 + Sold in packs of 1x1
Pack
 $19.37
Total
Add to Cart
(Only 1 Remaining)
CENTRIC 30113450close
<
>
Part image
Brake Pads are sold as a set. Quantity of one (1) is for both wheels
CENTRIC 30113450 Specifications
Friction Material Bonding TypeIntegrally Molded
Friction Material CompositionCeramic
Inner Pad Height (IN)1.925
Inner Pad Height (MM)48.900
Inner Pad Width (IN)5.681
Inner Pad Width (MM)144.300
Mounting Hardware IncludedYes
Notes2 Pads with 1 Wear Sensor / Clip
Outer Pad Height (IN)1.925
Outer Pad Height (MM)48.900
Outer Pad Width (IN)5.681
Outer Pad Width (MM)144.300
Pad Quantity4
Pad Shims IncludedYes
Pad Wear Sensor IncludedYes
Prepared For Pad Wear SensorYes
Ceramic; Includes Hardware
Features & Benefits:
  • Application specific friction compounds that combine improved stopping performance and reduced noise under braking
  • Installation ready with high performance shims
  • O.E. style gas slots and chamfers to optimize braking performance especially in repeat stop situations
  • Hardware included (where required)
Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?

A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:

Brake Pad Material Cost Dust Level Noise Level Stopping Power Pad Life
Organic
 $ Dust CloudDust CloudDust Cloud Speaker IconSpeaker Icon Stop Sign Hourglass Icon
Semi-Metallic
 $$ Dust CloudDust Cloud Speaker IconSpeaker IconSpeaker Icon Stop SignStop SignStop Sign Hourglass IconHourglass Icon
Ceramic
 $$$ Dust Cloud Speaker Icon Stop SignStop Sign Hourglass IconHourglass IconHourglass Icon
Installation Tips
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm


CENTRIC Warranty Information:
90 days/3,000 miles