PETERSON MANUFACTURING 421491
|
|
$2.62
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$2.62
Total
|
|
|
|
PETERSON MANUFACTURING 421491 Specifications |
---|
Daisy Chain | No | Length (IN) | 10.5 | Termination 2 | Stripped wire + Ring | Termination | PL3 |
|
|
Right angle plugs for single contact sealed incandescent stop/turn or backup alarms; 3-Wire, Rt. Angle, 10.5" |
What are the advantages to LED versus incandescent lights?
Unlike traditional, incandescent lights that use bulbs, LED lamps do not use delicate wire filaments that stretch, weaken and eventually fail.
- LED lamps last longer because they withstand road vibration and shock much more effectively than bulbs.
- The life expectancy of an LED is 100,000 hours or six times that of an average incandescent bulb.
- Besides the longevity, LED lamps consume significantly less power than incandescent lights. The amp draw of an LED can be as low as 1/10th that of an incandescent light. The lower amp draw means more power for other critical electrical needs.
- LED units are also growing in popularity because of greater emphasis on safety issues.
When a vehicle’s brake lights are applied, LEDs respond instantaneously and provide a brighter, more focused illumination. Incandescent lights take about a quarter of a second to get to 90% full brightness.
A study by the University of Michigan’s Transportation Research Institute found that LED lamps respond on an average 2/10th of a second faster than standard incandescent lamps. Using test results at 65 mph, LEDs improved reaction time and decreased braking distance by 16 feet.
Attention California Customers - WARNING: Cancer and/or reproductive harm - www.P65Warnings.ca.gov
Attention California Customers - Y
|
|