Features & Benefits:

• Symmetric vane castings enable proper heat transfer and thermal efficiency, resulting in superior braking power
• Black E-Coat anti-corrosive coating protects the cooling vanes and mounting surfaces from rusting prematurely
• Double disc ground friction surface finish virtually eliminates run out and any disc thickness variation issues
• Mill Balancing reduces rotor vibration and ensures smooth operation at all speeds
• Non-directional finish for improved rotor and pad break-in

Installation Tips

• Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
• Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
• After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
• Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
• Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
• Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
• After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function