|
FOUR SEASONS 83902
|
|
$45.89
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$45.89
Total
|
|
|
|
|
|
| FOUR SEASONS 83902 Specifications |
|---|
| Condenser Core Type | Parallel Flow | | Filter Drier Included | Included | | Gasket / Seals? | Yes | | Inlet Type | Block Fitting | | Material | Aluminum | | Mounting Hardware? | Not Included | | New or Reman | New | | O-Ring A Number/Desc | [24402] / Slimline Washer | | O-Ring A Quantity | 1 | | O-Ring B Number/Desc | [24401] / Slim Line Sealing Washer | | O-Ring B Quantity | 1 | | O.E. Replacement? | Yes | | Outlet Type | Block Fitting | | Refrigerant Type | R12 , R134a, R1234YF | | Style | Condenser | | Switch Port? | w/o Switch Port | | Type | Aluminum | | Type of Fit | Application Specific |
|
|
| Condenser w/ Receiver Drier/Accumulator Condenser Drier |
Condenser technology has evolved dramatically over the past 10-15 years. Designs have changed from a "tube and fin" design to a "micro" tube design which has shown to improve airflow efficiency. Four Seasons® employs the latest technology developments from the O.E., including micro and mini-micro-extruded tubes. These two tube configurations cannot be interchanged, therefore, FourSeasons condensers accommodate the design to replace the O.E. unit without any guessing.
- Brackets are ribbed to increase strength and rigidity for mounting and component support.
- All integral oil coolers are designed with rectangular tubes to precisely match the O.E. configuration in terms of form, fit and function. (Condenser tubes should never be used in the oil cooler section, nor should oil cooler tubes be used in the condenser section.)
- Condenser side members are "U" shaped to increase rigidity and protection against fin damage from excessive stress.
 Installation Tips - Old Refrigerant must be removed from the system in accordance with local, state, and federal laws.
- Replace the A/C System O-Rings / Seals connected to the A/C Condenser to prevent a Refrigerant leak.
- If the new A/C Condenser does not have an integrated drier, replace the A/C Receiver Drier / Accumulator as well. After opening your A/C System, this part becomes saturated with moisture and needs to be replaced.
- After installing the new A/C Condenser, evacuate the system for at least 45 minutes to remove any moisture. Make sure it holds vacuum for at least 5 minutes. If it does not, you may have a leak in the system. Find the leaking component and repair or replace it.
- Recharge the system with the correct amount and type of Refrigerant as specified in your Owner's Manual.
Attention California Customers - Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
|
| OEM / Interchange Numbers: 15777889, 15777890, 20820057, 20820058, 22704208, 22722290 |
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).Regular Inventory Warranty Information:120 Days |
|
