Discovery Brake Controller; w/ Time Based Activation; Includes Mounting Hardware
A Brake Controller is an electrical device that serves as an interface between a tow vehicle and the electric trailer brakes. It is typically mounted near the tow vehicle's steering wheel with an electrical line running to the trailer wiring connector. It usually requires the user to adjust brake gain to compensate for varying trailer loads and is necessary for the operation of electric trailer brakes.
A Time Released Brake Control is also called a 'time activated brake control', 'time actuated brake control' or 'time delayed brake control'. It is a brake control that increases the amount of pressure to the trailer brakes over time, based on the preset gain setting. It typically requires little or no calibration and is less precise than an inertia based brake control
Features:
Increases brake power based on gain setting and sensitivity adjustment
Operates 2-8 trailer brakes at a time (1-4 axles)
No internal moving parts and no leveling required
Digital display shows power adjustments in 0.1 increments
Mounts anywhere in the vehicle, at any angle
Features fully adjustable power and ramp time
Compatible with anti-lock brakes and cruise control
Equipped with a quick plug for fast, easy installation
Additional Resources
Installation Instructions Attention California Customers - WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate; which is known to the State of California to cause cancer; and Di-n-butyl phthalate; which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Additional Resources