CENTRIC
More Information for CENTRIC 10209160
{Alternate Inventory Numbers: 102.09160}
Continue Shopping
 
CENTRIC 10209160  
$19.47
Price
 $0.00
Core
 + Sold in packs of 1x1
Pack
 $19.47
Total
Add to Cart
CENTRIC 10209160close
<
>
Part image
Brake Pads are sold as a set. Quantity of one (1) is for both wheels
CENTRIC 10209160 Specifications
Friction Material Bonding TypeIntegrally Molded
Friction Material CompositionSemi-Metallic
Inner Pad Height (IN)3.492
Inner Pad Height (MM)88.700
Inner Pad Width (IN)5.512
Inner Pad Width (MM)140.000
Mounting Hardware IncludedNo
Notes4 Pads with 2 Weights
Outer Pad Height (IN)3.492
Outer Pad Height (MM)88.700
Outer Pad Width (IN)5.512
Outer Pad Width (MM)140.000
Pad Quantity4
Pad Shims IncludedYes
Pad Wear Sensor IncludedNo
Prepared For Pad Wear SensorYes
C-TEK; Semi-Metallic
Features:
  • Formulated for reduced noise
  • Shimmed to eliminate noise and vibration
  • Post cured for consistent performance throughout the service life of the brake pad
Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?

A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:

Brake Pad Material Cost Dust Level Noise Level Stopping Power Pad Life
Organic
 $ Dust CloudDust CloudDust Cloud Speaker IconSpeaker Icon Stop Sign Hourglass Icon
Semi-Metallic
 $$ Dust CloudDust Cloud Speaker IconSpeaker IconSpeaker Icon Stop SignStop SignStop Sign Hourglass IconHourglass Icon
Ceramic
 $$$ Dust Cloud Speaker Icon Stop SignStop Sign Hourglass IconHourglass IconHourglass Icon
Installation Tips
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm


CENTRIC Warranty Information:
90 days/3,000 miles