|
DANA 2021694
|
|
$580.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$580.79
Total
|
|
|
|
|
|
| DANA 2021694 Specifications |
|---|
| Axle Model | DANA 70 | | Carrier Breaks | 4.10 AND UP | | Cover Bolt Quantity | 10 | | Gear Ratio | 4.30 | | Include Installation Kit | N | | New Or Remanufactured | New | | On Vehicle Location | Front | | Pinion Gear Included | Y | | Pinion Gear Tooth Quantity | 10 | | Pinion Shaft Diameter | 1.750 in | | Pinion Spline Count | 29 | | Ring Gear Bolt QTY | 12 | | Ring Gear Bolt Thread In. | .500-20 | | Ring Gear Diameter (In.) | 10.500 in | | Ring Gear Included | Y | | Ring Gear Rotation | Reverse | | Ring Teeth Count | 43 |
|
|
For more than a century, the Spicer name has been built on a legacy of success with trusted drivetrain solutions for cars, commercial vehicles, off-highway machines, military vehicles, and those adapted for high-performance applications. Manufactured in Dana facilities around the world, every Spicer part is designed and produced to the same exacting standards as specified by OE manufacturers ensuring that vehicles continue to operate at peak performance levels.
Differential Identification Guide
To order the correct ring & pinion, it's crucial to know the differential type and gear ratio on your vehicle.- First, determine your Differential Type.
- Next, determine the gear ratio on your vehicle using one of the following methods:
- Count The Teeth: Divide the number of teeth on the ring gear (big gear) by the number of teeth on the pinion gear (small gear). If you have 37 teeth on your ring gear and 12 teeth on your pinion gear, you have a 3.08 Gear Ratio (37 ÷ 12 = 3.08).
- Verify Through A Dealer: Verify the ratio using your VIN number. This will only be accurate if the differential has not been previously modified.
|
DANA Warranty Information:12 Months |
|
