Water Pump w/ Back Housing and Thermostat Housing, Rubber Gasket, 4 O-Rings, 5 Bolts
Fan Clutch Included
No
Housing Material
Cast Aluminum
Impeller Material
Plastic
Impeller Rotation
Standard
Includes Back Housing
Yes
Outlet Quantity
2
Pulley Included
Yes
Thermostat And Housing Included
Yes
Timing Belt Driven
Yes
Water Pump Drive Type
Timing Belt
Includes Back Housing
Every belt driven water pump has a weep hole that might leak a little in the beginning. Some seepage from the weep hole is normal during the break-in period (about 10 minutes), and does not indicate a defect.
Cooling System Maintenance | Tips & Tools
Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:
Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
Consider replacing the Radiator Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
Cooling System Maintenance | Tips & Tools
Videos
Additional Resources