Every Edelmann Elite power steering pump is 100% new, to prevent unidentified deterioration. Parts are corrosion coated and tested, to ensure long life, and include steel pulleys, pipes & clamps, sensors and integrated reservoirs, where applicable, for easier installation.

Installation Tips

• Where applicable, replace the Power Steering Reservoir or clean the internal filter
• Completely flush the system with Power Steering Fluid prior to installation. Flushing the system is critical to prevent system contamination and failure
• Consider replacing the Belt (found in the Belt Drive category). Modern belts wear gradually and become less efficient, which can put strain on the Power Steering Pump and other belt driven components
• Install the pump, hoses, and all supplied o-ring seals according to installation instructions, to prevent leaking
• Install the Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
• A replacement Power Steering Pump can whine or make noise until air is purged from the fluid. Bleed the system during installation to prevent noise and extend the life of the steering components

Quantity Components that come in this kit 1 Power Steering Pump EDELMANN 6143P New Power Steering Pump with Pulley Info EDELMANN 6143P 1 Power Steering Pressure Hose EDELMANN 92516 Info EDELMANN 92516 2 Power Steering Fluid EDELMANN 70694 Quart Info EDELMANN 70694 1 Power Steering Filter EDELMANN 70699 Elite Extreme Weather Hose; Premium Universal Aluminum Dual Filteration In-line Filter w/ Magnet Info EDELMANN 70699 1 Power Steering Return Hose EDELMANN 81633 Info EDELMANN 81633