|
ROSTRA 2501920FZ
|
|
$113.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$113.79
Total
|
|
|
|
|
|
|
|
|
| FrontZone Front-Mount Parking Assist 4-Sensor Kit with Digital Display |
| The FrontZone is a forward-facing parking assist system developed by Rostra and designed to give every driver peace-of-mind while maneuvering their vehicle forward into a parking space. The FrontZone automatically provides both audible and visual alerts to the potential dangers of nearby obstacles through the use of an included buzzer built into a digital display that can be mounted on your vehicle's sun visor or dashboard. When the vehicle's ignition is powered on, the system will engage and output a single half-second "beep" alerting the driver that it has been activated. The system will further alert the driver to the presence of obstacles within each of it's detection zones. From a pulsing beep to a steady tone, the FrontZone system works to keep drivers aware of their surroundings. The system goes silent again only when an obstacle is no longer in range of making contact with the vehicle, or when the vehicle's speed is above 10 miles per hour. Included in every FrontZone ultrasonic parking assist system are four bumper-mountable ultrasonic sensors with additional 6-degree and 12-degree angled bezels added to accommodate curved bumpers. These sensors provide information to the main control module via the included vehicle-length wiring harness. The sensors included with each FrontZone system arrive with a flat-black finish that can be painted to match the vehicle's exterior. Metal bumper? No problem! While the four ultrasonic sensors provided with each FrontZone system are designed to be installed on vehicles equipped with a plastic bumper covering, installers will also find a set of four rubber sleeves and a 25mm hole saw for installing the FrontZone on most pickup trucks. The included hole saw and bumper drilling templates ensure a perfect hole is drilled each time, and the rubber sleeves provide the shock protection needed to eliminate false alarms from the sensors. Features:- FrontZone digital display can be mounted to the dashboard or clipped to a sun visor
- FrontZone control module interfaces with the bumper-mounted sensors to detect objects in your path
- Includes four black bumper sensors that can be painted to match your vehicle's exterior
- Display cable is designed to connect the included digital display to the FrontZone control module
- Power harness inludes both 12-volt power and ground wires to power the system
- Included holesaws ensure you get the right size hole for your bumper sensors
- Includes four angled and four flat bumper mounts allowing for fitment to virtually any application
- Includes four rubber bumper mounts with a holesaw for drilling into steel bumpers
 Additional Resources
Owner's Manual
|
|
