GM GENUINE 85566434
|
|
$159.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$159.79
Total
|
|
(Only 1 Remaining)
|
|
GM GENUINE 85566434 Specifications |
---|
End 1 Inside Diameter (MM) | 14.29 | End 1 Outside Diameter (IN) | 0.69 | End 1 Outside Diameter (MM) | 17.59 | End 1 Type | Fitting Block | End 2 Inside Diameter (IN) | 0.56 | End 2 Inside Diameter (MM) | 14.29 | End 2 Outside Diameter (IN) | 0.69 | End 2 Outside Diameter (MM) | 17.59 | End 2 Type | Fitting Block | Fittings Included | Yes | Gasket or Seal Included | Yes | Hose Shape | Molded Assembly | Inside Diameter (IN) | 0.62 | Inside Diameter (MM) | 15.75 | Material | "Aluminum, Rubber" | Outside Diameter (IN) | 0.77 | Outside Diameter (MM) | 19.5 | Refrigerant Type | R134a | Switch Service Port | Yes | System Pressure | Low |
|
|
This original equipment A/C hose assembly has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
- Connect A/C system components to carry the refrigerant
- GM-recommended replacements for your vehicle's original components
- Designed to withstand high pressures and temperatures
- The hard lines are typically made from extruded aluminum or sometimes from coated steel
- The hose is chemical-resistant and has hydraulically crimped fittings
- Service ports are specifically designed for service equipment and the particular refrigerant used
A/C Refrigerant Lines
DISCHARGE LINE |
The Discharge Line carries High Pressure Gas between the Compressor and Condenser
|
SUCTION LINE |
The Suction Line carries Low Pressure Gas from the Evaporator to the Compressor (sometimes through an Accumulator).
|
LIQUID LINE |
The Liquid Line carries High Pressure Liquid from the Condenser to the Evaporator (often through an Expansion Device).
|
Some assemblies combine two or all three lines together.
A/C System Repair Toolbox
|
Warranty Information:24 Month / Unlimited Mile Warranty |
|