|
ACDELCO 18R2239
|
|
$75.79
Price
|
$45.00
Core
|
+ Sold in packs of 1x1
Pack
|
$120.79
Total
|
|
|
(Only 1 Remaining)
|
|
|
| ACDELCO 18R2239 Specifications |
|---|
| Bleeder Thread Diameter | M10x1 | | Caliper Casting Material | Cast Iron | | Caliper Color | Natural | | Caliper Slides Included | Yes | | Caliper Type | Floating | | Casting Material | Cast Iron | | Finish | Plain | | Friction Material | Metallic | | Friction Material Composition | Metallic | | Height (IN) | 6.5 | | Inlet Fitting Type | Female | | Inlet Thread Diameter (IN) | 0.394 | | Inlet Thread Diameter (MM) | 10 | | Length (IN) | 13.8 | | Mounting Bolt Thread Pitch (MM) | 2.000 | | Mounting Bracket Included | Yes | | Mounting Hardware Included | Yes | | Mounting Hole Diameter (IN) | 14 | | Pad Wear Sensor Included | Yes | | Pads Included | Yes | | Piston 1 Diameter (IN) | 1.8 | | Piston 1 Diameter (MM) | 45.7 | | Piston 2 Diameter (IN) | 1.8 | | Piston 2 Diameter (MM) | 45.7 | | Weight (lb) | 21.5 | | Width (IN) | 7.1 |
|
|
| Gold / Professional; Reman.; Includes Semi-Metallic Pads |
ACDelco Gold (Professional) Reman Loaded Calipers come with brake pads already attached – no assembly is required. These premium aftermarket reman loaded disc brake calipers will provide the same performance, durability, and service life you expect from ACDelco.
Features:
- Pressure tested to ensure safe and confident braking
- Ethylene Propylene (EPDM) rubber components provide superior resistance to heat, corrosion, and leakage
- Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
- Pre-lubed and loaded with quality friction pads for smooth operation
- Includes bleeder screws, copper sealing washers, hardware, and mounting brackets (where applicable) for easy installation
 Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
| OEM / Interchange Numbers: 19176822 |
|
