Edelmann Elite™ hoses are designed to excel in extreme temperatures from polar vortex colds to record-breaking heatwaves by utilizing an enhanced rubber formulation and advanced engineering techniques.
Features:
Committed to OEM form, fit, and function
Superior temperature range performance
Outstanding impulse durability
Stellar cold temperature pliability
Edelmann Elite Hose Video
Hydroboost uses the pressure of the Power Steering Pump to power the Brake Booster. This is denoted by a third port on the Power Steering Pump and hoses that connect the pump to a brake unit behind the master cylinder.
Installation Tips
Replace all power steering hoses at the same time, to prevent system contamination
Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
Attention California Customers - WARNING: This product can expose you to Lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to - www.P65Warnings.ca.gov Wash hands after handling. (26)
Installation Tips