Copper Free Semi-Metallic Axle Pack Kit; Hardware Included
Bendix brake kits are designed to meet OE specifications for fit, form and function to provide safe, consistent and reliable performance.
Features & Benefits:
OEM style rotor vane configuration maximizes head dissipation speeds up the cooling process, eliminating noise and increasing braking performance
Pads feature a 100% Copper-Free, environmentally-friendly friction material
Pads include 4-layer noise-eliminating shim for quiet braking
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Installation Tips
