More Information for DYNAMIC FRICTION 1000117000

{Alternate Inventory Numbers: 1000-1170-00}

Continue Shopping

DYNAMIC FRICTION 1000117000

$45.79

Price

$0.00

Core

+ Sold in packs of 1x1

Pack

$45.79

Total

Add to Cart

Point to Zoom

Brake Pads are sold as a set. Quantity of one (1) is for both wheels

DYNAMIC FRICTION 1000117000 Specifications
FMSI Number	7427-D1170
Friction Material Attachment	Integrally Molded
Friction Material Composition	Low-Metallic
Inner Pad Height	2.291 in
Inner Pad Overall Thickness	0.642 IN
Inner Pad Width	4.85 IN
Mounting Hardware Included	No
Outer Pad Height	2.331 in
Outer Pad Overall Thickness	0.642 IN
Outer Pad Width	4.85 IN
Pad Wear Sensor Included	No
Pad Wear Sensor Type	Electronic
Prepared For Pad Wear Sensor	Yes

Track Pads; Low Metallic

Dynamic Friction Track Pads deliver unmatched braking performance, pedal response and superb brake control under all conditions.

Features & Benefits:

Excellent Friction Stability And Consistency
Extremely High Torque With Aggressive Initial Bite
High Friction Formulation
High Resistance To Brake Fade At High Operating Temperature Ranges
Offers High Friction Coefficient And Low Compressibility
Outstanding Modulation, Threshold Control, And Release Characteristics

Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?

A common question many drivers have when shopping for brake pads is �What is the difference between the different brake pad materials?� While all brake pads will stop your vehicle, there are pros and cons of each pad material:

Brake Pad Material	Cost	Dust Level	Noise Level	Stopping Power	Pad Life
Organic	$
Semi-Metallic	$$
Ceramic	$$$

Installation Tips

Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).

DYNAMIC FRICTION Warranty Information:
12 months/12,000 miles