• Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
• Manufactured to strict engineering standards/specifications in materials and tolerances
• Recommend to replace bushings in pairs to ensure best performance. note: sway bar bushing kits contain the needed pair

Cómo Determinar el Diámetro de Barra Estabilizadora

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

1. Use a digital caliper or micrometer for a precise reading
2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.