|
REIN AVB0548
|
|
$3.67
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$3.67
Total
|
|
|
|
|
|
| Especificaciones de REIN AVB0548 |
|---|
| Buje de Soporte Diseño | Sólido Goma |
|
|
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.Features:- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
- Matches original equipment design specifications
- Recommend to replace bushings in pairs to ensure best performance
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
 Cómo Determinar el Diámetro de Barra Estabilizadora To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
- Use a digital caliper or micrometer for a precise reading
- Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
- Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
|
| Fabricante Original de Equipo / Números de Intercambio: 33503404616 |
REIN Información de Garantía:24 meses, 24,000 Millas |
|
