FVP
More Information for FVP 12134076
{Alternate Inventory Numbers: 121-34076}
Continue Shopping
 
FVP 12134076  
$39.89
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$39.89
Total
FVP 12134076close
<
>
Part image
FVP 12134076 Specifications
ABS Sensor Ring IncludedNo
Bearings IncludedNo
Center Hole Diameter (IN)2.953
Center Hole Diameter (MM)75.000
Disc MountingFloating / DIH
Discard Thickness (IN)0.803
Discard Thickness (MM)20.400
Mounting Bolt Hole Circle Diameter (IN)4.724
Mounting Bolt Hole Circle Diameter (MM)120.000
Nominal Drum Diameter (IN)7.283
Nominal Drum Diameter (MM)185.000
Nominal Thickness (IN)0.862
Nominal Thickness (MM)21.900
Outside Diameter (IN)12.598
Outside Diameter (MM)320.000
Overall Height (IN)3.138
Overall Height (MM)79.700
Solid Or Vented Type RotorVented
Stud/Lug Hole Diameter (IN)0.654
Stud/Lug Hole Diameter (MM)16.600
Stud/Lug Hole Quantity5
Surface TypeSmooth
Vane StyleCurved
FVP Rotors are designed to meet OE performance criteria.

Features:
  • Symmetric vane, split-core castings for uniform heat distribution
  • Double disc ground friction surface for optimal performance and service life
  • Non-directional finish

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function



Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm


Warranty Information:
Limited Lifetime